Process Sequence of Garments Finishing Section

By | December 1, 2015

Process Sequence of Garments Finishing Section

Mayedul Islam
Merchandiser at Fashion Xpress Buying House.
Badda, Dhaka, Bangladesh.
Email: [email protected]

 

Introduction:

Garments finishing is an important section in readymade garments sector. It’s the last section of garments manufacturing department. As all the others section of garments manufacturing, garments finishing section has also followed a process flow chart, which has explained in this article.

Garments Finishing Section (Ironing)

Garments Finishing Section (Ironing)

Process Flow Chart of Garments Finishing:

Sewn garments received in finishing section

Initial quality check

Spot removing if there’s any spot

Ironing or pressing

Inspection

Hang tag attaching

Folding

Poly bag

Metal check

Packaging or cartoning

All the processes have discussed in the below table:

S/L No.
Process
Procedure
01
Sewn garments received in finishing section
Here, sewn garments are received for finishing the garments.
02
Initial quality check
Sewn garments are checked here by the quality controller. If found major sewing problems then garments sent again to the sewing section for rectification.
03
Spot removing if there’s any spot
Sometimes garments contain various types of spots which are removed here carefully.
04
Ironing or pressing
It’s one of the important processes in garments finishing. Here garments are ironed by following measurement chart of that garments.
05
Inspection
After completing ironing or finishing, garments are inspected again here by quality controller to confirm the correct measurement of the garments.
06
Hang tag attaching
In this section, hang tag have to attach with the garments.
07
Folding
After completing all the above processes, garments are folded here.
08
Poly bag
Garments are poly bagged here to keep the garments dust, dirt and other impurities free. send the garments safely in to the buyer.
09
Metal check
In this section, garments should be passed through a metal detector machine to identify metal lies in the garments.
10
Packaging or cartooning
Finally all the garments should pack to send the garments safely in to the buyer.

Speech from the writer:
If you read this article attentively then you can easily answer the below questions in the interview:

  1. Mention the flow chart of garments finishing section followed in apparel industry.
  2. Discuss about the process flow chart of garments finishing section followed in garments industry.
  3. Discuss about the flow chart of finishing section in garments industry.
  4. Mention the process sequence of finishing section in apparel industry.
  5. Discuss about the flow chart of garments finishing.

Facebook Comments

Leave a Reply

Your email address will not be published. Required fields are marked *