Process Flow Chart of Polo Shirt Manufacturing

By | November 17, 2015

Process Flow Chart of Polo Shirt Manufacturing

Mayedul Islam
Merchandiser at Fashion Xpress Buying House.
Badda, Dhaka, Bangladesh.
Email: [email protected]

 

Introduction:

Process flow chart of any item facilitates to complete the whole process very easily. An accurate process flow chart is very important to achieve the targeted garments production. Knitted polo shirt also maintains a process flow chart, which has discussed in this article.

polo shirt making

Polo shirt making

Process Flow Chart of Polo Shirt Manufacturing Followed in Apparel Industry:

Placket rolling

Moon

Moon top stitch

Neck closing

Placket matching with front

Placket attaching with front

Placket top stitch

Placket tuck

Matching (Front & Back Part)

Shoulder joint with shoulder tap

Shoulder top stitch

Collar cut without thread

Collar tuck with placket

Collar joint with body

Neck piping

Main label joint

Sleeve hem joint with sleeve

Collar back top stitch

Cutting & Matching

Sleeve joint

Placket kasa mara

Placket 1/16 top stitch

Placket tuck

Care label joint

Placket box top stitch

Inspection all back process

Bottom Hem

Side seam

Side band twill tape

Side band tuck

Side band top stitch

Sleeve inside tuck

Sleeve outside top stitch

Side band tuck

Button hole

Button positioning

Button attaching

All the processes have discussed in the below table:

SL No.ProcessProcedure
01Placket rollingPlacket rolling is done by using plain machine.
02MoonMoon is done by using plain machine.
03Moon top stitchMoon top stitch is done by using flat lock machine.
04Neck closingNeck closing is done by using plain machine.
05Placket matching with frontPlacket matching with front is done on the table.
06Placket attaching with frontPlacket attaching with front is done by using plain machine.
07Placket top stitchPlacket top stitch is done by using plain machine.
08Placket tuckPlacket tuck is done by using plain machine.
09Matching (Front & Back Part)Matching (Front & Back Part) is done on the table.
10Shoulder joint with shoulder tapShoulder joint with shoulder tap is done by using over lock machine.
11Shoulder top stitchShoulder top stitch is done by using flat lock machine.
12Collar cut without threadCollar cut without thread is done by using over lock machine.
13Collar tuck with placketCollar tuck with placket is done by using plain machine.
14Collar joint with bodyCollar joint with body is done by using over lock machine.
15Neck pipingNeck piping is done by using flat lock machine.
16Main label jointMain label joint is done by using plain machine.
17Sleeve hem joint with sleeveSleeve hem joint with sleeve is one by using over lock machine.
18Collar back top stitchCollar back top stitch is done by using flat lock machine.
19Cutting & MatchingCutting & Matching is done on the table.
20Sleeve jointSleeve joint is done by using over lock machine.
21Placket kasa maraPlacket kasa mara is done by using plain machine.
22Placket 1/16 top stitchPlacket 1/16 top stitch is done by using plain machine.
23Placket tuckPlacket tuck is done by using plain machine.
24Care label jointCare label joint is done by using plain machine.
25Placket box top stitchPlacket box top stitch is done by using plain machine.
26Inspection all back processInspection all back process is done on the table.
27Bottom HemBottom Hem is done by using flat lock machine.
28Side seamSide seam is done by using over lock machine.
29Side band twill tapeSide band twill tape is done by using plain machine.
30Side band tuckSide band tuck is done by using plain machine.
31Side band top stitchSide band top stitch is done by using plain machine.
32Sleeve inside tuckSleeve inside tuck is done by using plain machine.
33Sleeve outside top stitchSleeve outside top stitch is done by using plain machine.
34Side band tuckSide band tuck is done by using plain machine.
35Button holeButton hole is done by using button hole machine.
36Button positioningButton positioning is done on the table.
37Button attachingButton attaching is done by using button attaching machine.

Speech from the writer:
If you read this article attentively then you can easily answer the following questions in the interview:

  1. Flow chart of polo shirt manufacturing process.
  2. Process sequence of polo shirt manufacturing followed in apparel industry.
  3. Sewing sequence of polo shirt manufacturing followed in garments industry.
  4. Mention sewing flow chart of polo shirt manufacturing.

Facebook Comments

2 thoughts on “Process Flow Chart of Polo Shirt Manufacturing

  1. MD.Moshiur Rahman

    I Want to Know top 20 Brand JEANS PANT Name in Bangladesh & 20 Abroad. 20 Brand Shirt Name&20 Polo Shirt…..

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *