How to Make Garment Inspection List in RMG Industry

How to Make a Garment Inspection List in RMG Industry?

Each garment should be inspected by following some key parameters in the readymade garments industry. Otherwise different faults may take place in the garments which influence to rejection of the garments by the buyer. As its importance, this article has shown a shirt inspection (garment inspection) list which has followed in the garments manufacturing industry.

Shirt inspection in apparel industry

Fig: Shirt or garment inspection in the apparel industry

Shirt Inspection List Followed in Apparel Industry:

SL No.
Location
Inspect for
01
Collar
Both with the same length (±1/4) inch,
Matching of check and stripe with both side,
Proper sewing,
Broken stitch,
Collar in the flat position and so on inspection should be done.
02
Size
Inspection for the measurements of different parts of the shirt presented to the size label of the shirt must be
acceptable.
03
Button and buttonhole
Accurate sewing and making with the same distance,
Seam puckering,
Broken or defected button,
Pattern matching (±1/8) inch and so on inspection should be done.
04
Pocket
The upper part of the pocket in a horizontal position,
Seam puckering or appearance,
Defects of sewing,
The two corners (upper) of the pocket secured by backstitch pattern matching (±1/8) inch and so on inspection should be done.
05
Hem
The proper appearance of stitch or seam puckering,
Edge without stitching skipped stitch,
Proper sewing from the edge of fabrics (1/16) inch and so on inspection should be done.
06
Yoke and shoulder
Sewing and placing of dirt with the proper distance,
The appearance of stitch or seam puckering,
Skipped stitch and so on inspection should be done.
07
Side seams
Proper matching with stripe/ check or pattern sleeve,
The appearance of the seam,
Defected stitch,
Raw edges and so on inspection should be done.
08
Cuffs
Stripe with sleeve,
Check or pattern matching (±1/8) inch,
Defected stitch & sewing and so on inspection should be done.
09
Finished appearance
Thread drawn-off from the edges,
Oil spots or any dirt, shade variation, defected fabric, and so on must be inspected.

2 comments

  • Philip Joseph

    Would like to have above all points in my Mail id

  • Alamin

    Sir,
    I am md. alamin.I completed B.sc hon’s.And I complete woven garments marchandising from BGMEA.I achieve 4.00 out of 4.00.I have 1 year experience in this line.
    Now I need a job urgentlly.If possible please help me.

Leave a Reply to Philip Joseph Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.