Flow Chart of Stone Enzyme Wash

Flow Chart of Stone Enzyme Wash

What is Stone Enzyme Wash?

In garments washing, stone enzyme wash is done by using pumic stone and enzyme chemical. It is one of the revolutionary developments in garments washing. Stone enzyme wash is three types such as stone enzyme wash, medium stone enzyme wash, and heavy stoned enzyme wash. Garments or apparel or clothing look like too much pretty after applying stone enzyme wash. As its importance, this article has shown the correct process flow chart for stoned enzyme wash.

"<yoastmark

Process Sequence of Stoned Enzyme Wash:
Process Flow Chart of Medium Stoned Enzyme Wash:
Chronological Process of Heavy Stone Enzyme Wash:

Garments loading into the m/c

De-sizing

Rinsing for two times

Stone loading into the machine

Enzyme chemical added into the m/c

Tumbling for 30-60 minutes

Rinse (two times)

Softening

Extracting or hydro

Drying

All the above processes have discussed below:

SL No.
Process
Procedure
01
Garments loading into the m/c
At first, the required amount of garments have to load into
the garments washing machine.
02
De-sizing
It is the first task of the stoned enzyme washing process. Garments are de-sized here by using the bridge or anti back stain.
03
Rinsing for two times
To remove size material from the garments, it should be rinsed two times.
04
Stone loading into the machine
In this process, the required amount of pumic stone should be loaded into the washing machine.
05
Enzyme chemical added into the m/c
Depending on the buyer’s approved garment wash reference, the required amount of acid enzyme or neutral enzyme is added here.
06
Tumbling for 30-60 minutes
After adding all the required materials and chemicals into the machine, garments are tumbled here for 30-60 minutes depending on the approved garment wash reference shade. In the case of normal enzyme wash, times needed a maximum of 20minutes, for medium stoned enzyme wash times needed a maximum of 30-40 minutes and for heavy stoned enzyme wash times needed more than 40 minutes.
07
Rinse (two times)
Here, garments have to rinse two times to remove
starch from the garments perfectly.
08
Softening
A softening chemical (anti ozone softener) is added here for achieving the soft effect in the garments.
09
Extracting or hydro
After completing all the above processes, garments are unloaded from the machine here and extracting by using a hydro extractor.
10
Drying
Finally, garments are dried here by using a gas dryer or steam dryer depending on the garment’s shade.

3 comments

Leave a Reply to mohammad Ramzan Ali Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.